GWS-R-K - EOAT Quick Change System Round - Fixed

V1 - The EOAT Quick Change System can be used for all types of robots
V2 - thumb pressure is sufficient to switch unit (Bayonet)
V3 - Pneumatic is directly connected
V4 - locking pin to lock the closed position
V5 - Compatible with Wemo / Gimatic / SAS Systems
V7 - BACKLASH REDUCTION by integrated pressure screw
V8 - air- or vacuum connections are inside thread: as needed change only
the air connectors
V9 - pressure screw fixed by set-screw

Electrical connectors on request
advanced data sheet on request

Do you have already a GIMATIC electrical plug (for robot or gripper side)?
You can order the missing counterpart by using this article-numbers:

1-10-91-86-00-EST - electrical connector for robot side
1-10-91-96-00-EST - electrical plug for gripper side

The illustration above shows the EOAT Quick Change System Round
Fixed Lock GWS-R-10-K

load values are statically determined:
D = handling weight only as guidance value
(direct at the Quick Change System)
E = maximal torque
F = max. bending moment
holding force 10N = 1kg
M = GWS-R-...-K is compatible with Gimatic groundplate
QC...-B (gripper side)
N = number of air or vacuum connections
O = diameter tube / thread (not tapered)
X = Suitable for gripper base plate round GGP-R

At disassembly of GGP-R-10 the air connections
will be closed at the GWS-R-10-K.
If the device shutdown for long period please block off the
compressed air supply line (e.g. by using PKH - Pneumatic Ball Valve)